CONTACT US

Hands On Training Set

Hands On Training Set

HOT-100A

Hands on Training Set contains three trainers in one unit. Trainers are Aircraft Safety Wire Trainer, O-ring Application Trainer, Bearing and Lubrication Trainer.

It is the perfect trainer for hands-on laboratories in aviation maintenance schools. Five (5) students can work at the same time on the trainer. While three students can practice safety wiring, one student can practice O-ring tasks, and one can practice bearing and lubrication tasks.

Because of its compact design, the trainer can be used as a practice exam trainer that contains numbers of practical tasks without any time delay between students.

Features:

  1. SAFETY WIRE
    • Understanding fundamentals of Safety Wire and its components.
    • Metal durable box to simulate different areas on a typical aircraft
    • Turnbuckle wiring application
    • Fire tube clamp wiring application
    • Push-pull rod castle nut cutter pin application
    • Cutter pin safety wire application
    • Guarded switch safety wire application
    • Electrical connector safety wire application
    • Fittings safety wire application
    • Angled plates and bolts
    • Side aluminum panel to be used as propeller flange bolt order safety wire application
    • Side aluminum panel to be used as standard bolt order safety wire application
    • HELICOIL application aluminum plate
    • Three (3) different safety wire samples.
  2. BEARING and LUBRICATION
    • The trainer allows trainees to understand fundamentals of Bearing & Lubrication Application
    • Lubrication area.
    • Application greasing area
    • Application comparator area
    • Drain line.
  3. O-RING
    • Understanding fundamentals of aircraft O-Ring
    • O-ring and sealing applications practices
    • Normal and upside down sealant or gasket application areas
    • Contain the cylinder O-ring application
    • Common O-ring types are displayed in the set
    • Ten (10) application points in the set for practice
    • Transparent and aluminum application point for sealing

Components:

  1. Aluminum Parts
  2. Drilled Bolts
  3. Aviation standard safety wire twisters (2 pieces)
  4. Aviation standard 0,20/0,22 or 0,32 safety wires (3 boxes)
  5. HELICOIL set (M5, M6, M8, M10, M12)
  6. HELICOIL removing tool (M3-M10)
  7. Two (2) types of pillow block bearing.
  8. One (1) deep groove ball bearing
  9. One (1) cut-away deep groove ball bearing
  10. One (1) spherical roller bearing
  11. One (1) cut-away Spherical roller bearing
  12. One (1) Thrust ball bearing
  13. One (1) cut-away Thrust ball bearing
  14. One (1) Taper roller bearing
  15. One (1) cut-away Taper roller bearing
  16. One (1) needle roller bearing
  17. Two (2) linear bearings
  18. Five (5) degreasing sprays
  19. Two (2) grease pumps
  20. Five (5) oilers
  21. Comparator with accessories
  22. Fifteen (15) different types of O-Ring
  23. Ten (10) practice components
  24. Inch and Metric Full O-ring Box
  25. Tube liquid seals
  26. O-ring extractor tool kits

Documentation:

  • General Hands On Applications Manual