Bernoulli’s Theorem and Flow Measurement
FM-150.08
With the training set, Bernoulli’s theorem should be demonstrated and flow measurement calculations can be made with various flow measurement elements. The training set has its own storage, pump and table, so it should be able to work on its own
Specifications
- With the training set, Bernoulli’s theorem should be demonstrated and flow measurement calculations can be made with various flow measurement elements.
- The training set has its own storage, pump and table, so it should be able to work on its own.
- The venturi in the training set transparent and the measuring points should be clearly visible.
- The training set should include the following measurement elements:
- Rotameter type must be flow meter.
- Turbine must have flow meter and digital indicator.
- Venturi with 6 tubes
- Orifice plate with 2 tubes
- U manometer with 2 tubes
- There should be a total of 12-tube column manometer, 2 of which are in the pitot tube.
- Column manometers must be at least 500 mm high.
- There is a pump on the training set to create positive pressure when necessary.
- At the exit of the training set, there is a throttle valve to adjust the flow rate when necessary.
- All pipes used in the training set has 1 “diameter and transparent.
- The dimensions of 1600mm X 1200mm x 800 mm (Height X Length X Width).