Anti-skid & Autobreak System Training Set with Two Wheels


Our Anti-skid and Auto Braking System trainer is designed to represent the anti-skid braking system that is one of the most essential components of modern jet aircraft.

This training set gains more importance as the need for training maintenance technicians in this area keep increasing. Hands-on training provided by this set ensures that trainees not only comprehend the theory, but they are also well prepared in practice to maintain the anti-skid braking system. Anti-skid and Auto Braking System Training Set includes a typical hydraulic brake system as well as the anti-skid assemblies and components.

This training set contains two wheels.


  1. Understanding fundamentals of aircraft auto-brake/anti-skid and its components.
  2. Anti-skid and auto-brake system able to work together and independently
  3. Non operations of auto-brake scenario are implemented
  4. Operations of auto-brake scenario are implemented
  5. Take off scenario is implemented
  6. Landing scenario is implemented
  7. Auto-brake scenarios is implemented
  8. Rejected take off scenario is implemented
  9. Instructor’s panel for Fault Insertion


  1. Auto-brake/anti-skid Control panel
    • Landing gear position lamps
    • Auto brake Low-Med-Max selection illuminated push button
    • Anti-Skid on/off switch
    • Rejected take-off selection illuminated push button
  2. Master Caution and aural warning Horn Panel
  3. Lockable Landing gear control lever
  4. Hydraulic pump on/off switch and lamp
  5. AC engine on/off switch and lamp
  6. Air/ground switch
  7. Test button
  8. Skid simulation panel
  9. INOP lamp
  10. Master power panel
    • Master power lamp
    • Master power switch
  11. 7” inch screen (like EICAS or ECAM)
    • Landing gear position
    • Landing door position
    • Numeric pressure value
    • Sensors status
    • Anti-Skid/Auto-Brake position status
    • Numeric Simulated air speed value
  12. Electronic Control Box (Antiskid Control Computer)
  13. Antiskid Valve
  14. TQ – throttle quadrant
  15. Electrically Driven Hydraulic Pump
  16. Hydraulics Filter
  17. Hydraulic Fluid Reservoir
  18. Hydraulics tank Drain Valve
  19. Check valve
  20. 0-100bar Hydraulic System analog pressure gauge
  21. 0-100 bar Hydraulic System Pressure sender
  22. Two (2) pieces Aircraft Tire
  23. Two (2) pieces Aircraft Wheel
  24. Aircraft foot Brake Pedal
  25. Aircraft foot Brake master cylinder
  26. Brake microswitch
  27. Two (2) pieces AC motor for turning the wheels
  28. Two (2) pieces AC motor driver

ATA Chapters

  • The system mounted on a metal/aluminum mobile stand.
  • Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
  • Training video for teachers
  • Delivered fully assembled tested and ready to operate
  • Colored Ultraviolet printing method on aluminum composite panel


  • User’s Manual
  • Study Guide
  • Instructor’s Guide
  • Components Diagrams

Power Specs

  • Electrical box
  • Residual current device
  • Emergency Button
  • Energy Signal Lamp
  • 110 VAC 60 Hz or 220-240 VAC 50 Hz

Dimensions and weight

  • Height: Width:    Depth: