Aircraft Hydraulic System Trainer


Aircraft Hydraulic System Trainer provides students with practical experience needed to understand the function, to get to know components and to improve troubleshooting skills.

Fully functional hydraulic system designed so that every component can be disassembled, reassembled and functionally tested.

All the components mounted on the trainer are operational, removable and they can be reinstalled.


  1. Hydraulic control solenoids
  2. Flap Cylinder
  3. Speed Brake Cylinder
  4. Landing Gear Cylinder
  5. Landing Gear Door Cylinder
  6. System is powered by Hydraulics Pump, Hand Pump or Accumulator.
  7. The hardware used in the trainer is mounted to the frame in a way that it can be easily observable by students
  8. The system mounted on a metal/aluminum mobile stand.
  9. Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable
  10. Delivered fully assembled tested and ready to operate
  11. Colored Ultraviolet printing method on aluminum composite panel
  12. Wirings on the trainer is connected via terminals
  13. Wires have clear identification labels for each wire
  14. When pump malfunction is given in the trainer, the accumulator and the
    hand pump able to control the flap, Speed Break, Landing Gear and Landing Gear Door Cylinders


  1. Electrically Driven Hydraulic Pump
  2. Hydraulic Tank
  3. Hydraulics Filter
  4. Landing gear control solenoid
  5. Landing gear door control solenoid
  6. Flap control solenoid
  7. Speed Brake control solenoid
  8. Emergency Hand Pump
  9. Hydraulic Fluid Reservoir
  10. Hydraulic Accumulator with automatic filling
  11. Hydraulic System analog pressure gauge (8 pieces)
  12. Accumulator Pressure sender
  13. Accumulator manual Control Handle
  14. Hydraulic system pressure sensor, with pressure test
  15. Cylinder
  16. Check valve
  17. Control Panel
  18. Aircraft Circuit breakers
  19. Aircraft Circuit breaker lockout
  20. Power Panel
  21. Aircraft Master Caution and aural warning Horn Panel
  22. Energy Lamp
  23. 7 or 10 inch touchable screen (like EICAS or ECAM)
  24. Landing gear position
  25. Landing gear door position
  26. Speed brake position
  27. Flap position


  • User’s Manual
  • Study Guide
  • Instructor’s Guide
  • Training video for teachers

Power Specs

  • Electrical box
  • Residual current device
  • Emergency Button
  • Energy Signal Lamp
  • 110 VAC 60 Hz or 220-240 VAC 50 Hz

Required Items

  • DTE-10 Hydraulic Oil 5 Liters
  • DTE-46 Hydraulic Oil 28 Liters


  • Instructor’s Panel Control Application (without computer) for Scenario and
    Fault Simulation