Features for UHT-100V:

1. Understanding fundamentals of aircraft hydraulic system and its components.
2. Hydraulic control solenoids
   • Flap
   • Speed Brake
   • Landing Gear
   • Landing Gear Door
3. System is powered by Hydraulics Pump, Hand Pump or Accumulator
4. Some of Trainer Functions
   • Hydraulic power functions
   • Accumulator functions
   • Emer hand pump functions
   • Pumps fault functions
   • ECAM functions
   • Single chime functions
   • Master caution functions
   • Master warning functions
   • Check valves functions
5. Some of Trainer Processes
   • Hydraulic system functional test process
   • Hydraulic system leak test process
   • Emergency system test process
   • Automatic accumlator filling process
6. All wires should be coded and labeled for troubleshooting.
7. The hardware used in the trainer is mounted to the frame in a way that it can be easily observable by students.
8. The system mounted on a metal/aluminum mobile stand.
9. Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
10. Delivered fully assembled tested and ready to operate
11. Colored Ultraviolet printing method on aluminum composite panel

Features for HYD-100V:

1. Understanding fundamentals of aircraft hydraulic landing gear system and its components.
2. Some of Trainer Functions
   • Landing gear extension functions
   • Landing gear retraction functions
   • Speed brake lever functions
   • Flap lever functions
   • Brake functions
   • Park brake functions
   • Hydraulic power functions
   • Accumulator functions
   • Emergency hand pump functions
   • Pumps fault functions
   • ECAM functions
   • Single chime functions
   • Master caution functions
   • Master warning functions
   • Check valves functions
3. Some of Trainer Processes
   • Landing gear extension test process
   • Landing gear retraction test process
   • Hydraulic system functional test process
   • Hydraulic system leak test process
   • Hand pump test process
   • Accumulator test process
   • ECAM test process
   • Emergency system test process
4. Hydraulic Flap System
5. Brake System
6. Aircraft Wheel System
7. Hydraulic System Control
8. Lower ECAM (on the main unit)
9. Master Caution System
10. Aural warning Horn Panel System
11. Hydraulic Landing Gear Trainer able to display the landing gear operating system of a regular aircraft.
12. Digital sensor data and switch states used in the set.
13. Throttle lever with associated components complete the warning circuit of gear up warning horn.
14. The accumulator and the hand pump be able to control the landing gear.
15. Wirings on the trainer are connected via terminals.
16. Wires should have clear identification labels for each wire.
17. All wires should be coded and labeled for troubleshooting.
18. The system mounted on a metal/aluminum mobile stand.
19. Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
20. Delivered fully assembled tested and ready to operate
21. Colored Ultraviolet printing method on aluminum composite pane