CONTACT US

Aircraft Hydraulic Landing Gear System Trainer (Advance)

HYD-100B

HYD-100B Landing Gear Module for offers effective hands-on training for aircraft landing gear system maintenance trainees. It assures that technicians are trained to maintain the landing gear system in the best way possible and in accordance with safety standards.

It displays the landing gear mechanism as found in actual aircraft. This trainer is designed to represent a landing gear system. It contains all components and assemblies of an actual hydraulic landing gear system.

Model HYD – 100B features complete wheel and tire assembly with hydraulic brake system, including master cylinder and brake pedal. The control unit includes control throttles for landing gear and hydraulic flap operation. Indicators demonstrate show up, down, and in-transition conditions. A throttle warning horn is also mounted on the control panel.

This model comes mounted on a mobile stand to provide a clear view from all directions.

Features:

  1. Hydraulic Landing Gear System
  2. Wheel housing damper.
  3. Hydraulic Flap System
  4. Hydraulic Spoiler System
  5. Hydraulic Brake System
  6. Aircraft Wheel System
  7. Hydraulic System Control
  8. Lower ECAM/EICAS
  9. Master Caution System
  10. Master Warning System
  11. Aural warning Horn Panel System
  12. Hydraulic Landing Gear Trainer able to display the landing gear operating system of a regular aircraft.
  13. Digital sensor data and switch states used in the set.
  14. Throttle lever with associated components complete the warning circuit of gear up warning horn.
  15. The accumulator and the hand pump be able to control the landing gear.
  16. Wirings on the trainer are connected via terminals.
  17. Wires have clear identification labels for each wire.
  18. All wires are coded and labeled for troubleshooting.
  19. The system mounted on a metal/aluminum mobile stand.
  20. Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
  21. Delivered fully assembled tested and ready to operate.
  22. Colored Ultraviolet printing method on aluminum composite panel.

Components:

  1. Electrically Driven Hydraulic Pump
  2. Hydraulic Tank
  3. Hydraulics Filter
  4. Emergency Hand Pump Hydraulic Accumulator with automatic filling system
  5. Hydraulic System analog pressure gauge (8 pieces)
  6. Hydraulic System Pressure sender
  7. Hydraulically Operated Landing Gear Mechanism
  8. Drain Valve
  9. Hydraulic Actuating Cylinder for Landing gear
  10. Hydraulic Actuating Cylinder for Landing gear door
  11. Check valve
  12. Hydraulic Sequencing System and Operate
  13. Hydraulic Flap Actuating
  14. Flap Position Sensors
  15. Flap control switch
  16. Cutaway or Mock-up Flap
  17. Brake pressure gauge
  18. Aircraft Tire Assembly (6 or 8 inch)
  19. Aircraft Tire
  20. Aircraft Wheel
  21. Aircraft Brake disk
  22. Aircraft Brake Plate
  23. Aircraft Brake caliber
  24. Hydraulic Brake Components
  25. Aircraft Brake master cylinder
  26. Park brake
  27. Brake Fluid Reservoir
  28. Aircraft Brake Pedal
  29. Brake Hose
  30. Throttle Lever (TQ)
  31. Control Panel
    • Circuit breakers
    • Aircraft Circuit breaker lockout
    • Hydraulic Button
    • Hydraulic Fault Button
    • Lockable Landing gear control lever
    • Power Panel
    • Aircraft Master Caution and aural warning Horn Panel
    • Aircraft Landing gear control panel
    • Landing gear status lamp
    • Test button
    • Lockable Flap control panel/lever (pull-able )
    • Lockable speed brake control panel/lever ( pull-able )
    • Landing Gear door control lamp
    • Energy Lamp
  32. Lower EICAS or ECAM(7 or 10 inch)
    • Landing gear position
    • Landing door position
    • Speed brake position
    • Flap position
    • Pressure gauge
    • Sensors status
    • Landing gear system control
  33. Landing gear control solenoid
  34. Landing gear door control solenoid
  35. Flap control solenoid
  36. Speed Brake control solenoid

Documentation:

  • User’s Manual
  • Study Guide
  • Instructor’s Guide
  • Training video for teachers

Power Specs

  • Electrical box
  • Residual current device
  • Emergency Button
  • Energy Signal Lamp
  • 110 VAC 60 Hz or 220-240 VAC 50 Hz

Required Items

  • DTE-10 Hydraulic Oil 5 Liters
  • DTE-46 Hydraulic Oil 28 Liters

Accessories

  • Instructor’s Panel Control Application (without computer) for Scenario and Fault Simulation
  • 10 cotter pins for L/G wheel nut
  • 1 Analog tire pressure gauge for aircraft tire

Optional Items

  • Three Jacks with stands units refer to HYD-100JCK
  • Gravity Lever