Aircraft Emergency Pneumatic Trainer


The Aircraft Pneumatic System Trainer is designed to provide hands-on training on a functional pneumatic system. The system represents a pneumatic system that is used as an emergency backup for hydraulic system. A typical example is emergency braking system in case of hydraulically actuated brake failure.

The trainer can be operated by a switch which allows the air pressure from a reservoir to operate an actuator. The reservoir can be refilled after use from any pressurized air source like shop air or air compressor.


  1. Understanding main back-up Pneumatic system and its components
  2. Understanding emergency braking system.
  3. Understanding emergency backup for hydraulic system fail.
  4. Wirings on the trainer are connected via terminals.
  5. Wires should have clear identification labels for each wire.
  6. All wires should be coded and labeled for troubleshooting.
  7. The system mounted on a metal/aluminum mobile stand.
  8. Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
  9. Delivered fully assembled tested and ready to operate
  10. Colored Ultraviolet printing method on aluminum composite panel


  1. Air Pressure Gauge
  2. Pneumatic Reservoir
  3. Pneumatic Actuators (Qty. 2)
  4. Filler Valve
  5. Air Filter
  6. Selector Valve / Solenoid Control Valve
  7. Shuttle Valve
  8. Check Valve
  9. Regulator
  10. Moisture Separator
  11. Air compressor not included, must buy locally


  • User’s Manual
  • Study Guide
  • Instructor’s Guide
  • Training video for teacher

Power Specs

  • LAN connection point
  • Electrical box
  • Residual current device
  • Emergency Button
  • Energy Signal Lamp
  • 110C 60 Hz or 220-240 VAC 50 Hz

Required Items

  • Air Compressor max 90 PSI pressure outlet
  • DTE-46 Hydraulic Oil 28 Liters