Aircraft Digital Ice & Rain Protection & Control System Trainer


The trainer is designed to showcase the basic Anti-Ice & Rain Protection system used in a commercial aircraft.


  1. Aircraft systems is included in the training set below,
    • Pitot Probe / Total Air Temperature (TAT) / Angle Of Attack (AOA) LED
    • Ice Detector LED
    • Cowl Anti-Ice Valve LED
    • Wing Anti-Ice, Control Valve LED
    • Windshield Wiper LED
    • Window Heat LED
    • Forward Drain Mast LED
    • Aft Drain Mast LED
    • Elevator Pitot Probes LED
  2. Icing conditions controlled
  3. Every system on the plane are represented by independently controlled LEDs.
  4. The LEDs is blue when there is icing, and red when anti-icing systems are active.
  5. De-icing system is controlled from a 7-inch touchscreen.
  6. Touchscreen visual is similar to Boeing type aircraft.
  7. De-icing system timers is active.
  8. The LEDs on the training set panel are placed according to the relevant
    systems or valves on an airplane image.
  9. At least 20 LEDs are used in the training set.
  10. Metal/aluminum frame.
  11. Colored Ultraviolet printing method must be used in all writings and drawings on aluminum composite panel.


  1. Master Power Control
  2. Master Power Lamp
  3. Pitot Probe / Total Air Temperature (TAT) Probe / Angle Of Attack (AOA) Probe LED
  4. Ice Detector LED
  5. Cowl Anti-Ice Valve LED
  6. Wing Anti-Ice Control Valve LED
  7. Windshield Wiper LED
  8. Window Heat LED
  9. Forward Drain Mast LED
  10. Aft Drain Mast LED
  11. Elevator Pitot Probes LED
  12. Temperature Switch
  13. Visible Moisture Switch
  14. Icing Status Switch
  15. Engine 1 Start/Stop Button
  16. Engine 2 Start/Stop Button
  17. Apu Start/Stop Button
  18. TQ Lever Position Switch
  19. Gnd Pneu Power Unit Start/Stop Button
  20. Aircraft Position Switch
  21. Inlet Cowl Air Pressure Switch
  22. Ice Detector Switch7 inch touchable screen
  23. Delivered fully assembled tested and ready to operate


  • User’s Manual
  • Study Guide
  • Instructor’s Guide
  • Training video for teachers

Power Specs

  • Electrical box
  • Residual current device
  • Emergency Button
  • Energy Signal Lamp
  • 110C 60 Hz or 220-240 VAC 50 Hz