Features:

1. Understanding fundamentals of aircraft Cabin Pressurization and its components.
2. The set is functional and configured like a typical aircraft Cabin Pressurization system.
3. The trainer includes the following panels that will work functionally.
   • Aircraft Cabin Pressurization panel
   • Aircraft air condition panel
   • Aircraft auto-pilot panel
   • Test panel
   • Master power panel
   • Master caution panel
4. Two transparent cabins in the training set to simulate the interior of the cabin.
5. Two (2) outflow valves, 1 negative pressure safety valve, and positive pressure safety valve (as a substitution) are in the transparent cabin.
6. Out Flow Valves are engine controlled.
7. The valves in the cabin pressurization system operate automatically during the take-off and landing.
8. Cabin pressurization valves are both controlled manually and automatically.
9. The trainer is able to perform fully automatic take-off and landing.
10. Indicators, panels and valves work simultaneously in landing and take-off simulations.
11. Take-off and landing simulations are controlled from the autopilot panel.
12. Vertica speed and altitude are determined and selected during take-off and landing.
13. Valve failures are easily observed on gauges and panels.
14. PACK, BLEED, PACK FLOW and TEMPERATURE selections are made at the air condition panel.
15. LDG elevation, MODE SELECT, MAN V/S CONTROL and DITCHING are done at the cabin pressurization.
16. The selections made in the panels are visible on the screen.
17. Wirings on the trainer are connected via terminals.
18. Wires should have clear identification labels for each wire.
19. All wires should be coded and labeled for troubleshooting.
20. The system mounted on a metal/aluminum mobile stand.
21. Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
22. Delivered fully assembled tested and ready to operate
23. Colored Ultraviolet printing method on aluminum composite panel

Components:

1. Heat Exchanger
2. Muffler
3. Shut-Off Valve
4. System Indicators
5. PSU( Passenger Service Unit)
6. 10 inch Lower ECAM
   • Vertical speed indicator
   • Altimeter indicator
   • Cabin Altimeter
   • Cabin pressure
   • Air pressure
   • Differential pressure
   • Status area
     • Flow status
     • Pack flow status
     • Bleed status
     • Auto pilot status
     • Pressurization mode
     • Temp
     • Air/ground
7. 2 Outflow valve
8. 2 outflow control computers
9. Aircraft Cabin Pressurization panel
   • Man V/S Control Switch
   • Mode selector
   • LDG ELEV Knob
   • Aircraft air condition panel
   • Pack-1 control
   • Pack-2 control
   • ENG 1 Bleed
   • ENG 2 Bleed
   • APU Bleed
   • Pack Flow Selector
   • X bleed control
   • Hot air Vale button
10. Aircraft auto-pilot control panel
    • Vertical Speed Selector
    • Altitude Knob
    • Control Switch
11. Terminals
12. Master power panel
13. Master power light
14. Master caution panel
15. Aural warning horn
16. Test panel
17. Circuit Breakers,
18. LAN output
19. Outflow valve control boxes
20. Outflow valve terminals
21. Vacuum chamber (altitude simulator)
22. Cabin pressure chamber (cabin simulator)
23. Regulator (simulates air to cabin)
24. Cabin pressure sensor
25. 24 VDC power supply