Aircraft Cabin Pressurization Trainer V.2

CPS-100B

The Cabin Pressurization trainer demonstrates how an aircraft cabin pressurization and air conditioning system function.

The compact construction of the set allows trainees to conceive the system as understanding the connection between the various parts of the system in regulating the cabin environment.

The trainer includes two chambers simulating altitude and cabin pressure.

The vacuum simulating chamber is able to simulate up to roughly 0 – 40,000 ft.

Features:

  1. Understanding fundamentals of aircraft Cabin Pressurization and its components.
  2. The set is functional and configured like a typical aircraft Cabin Pressurization system.
  3. The trainer includes the following panels that will work functionally.
    • Aircraft Cabin Pressurization panel
    • Aircraft air condition panel
    • Aircraft auto-pilot panel
    • Test panel
    • Master power panel
    • Master caution panel
  4. Two transparent cabins in the training set to simulate the interior of the cabin.
  5. Two (2) outflow valves, one (1) negative pressure safety valve, and positive pressure safety valve (as a substitution) are in the transparent cabin.
  6. Out Flow Valves are engine controlled.
  7. The valves in the cabin pressurization system operate automatically during the take-off and landing.
  8. Cabin pressurization valves are both controlled manually and automatically.
  9. The trainer is able to perform fully automatic take-off and landing.
  10. Indicators, panels and valves work simultaneously in landing and take-off simulations.
  11. Take-off and landing simulations are controlled from the autopilot panel.
  12. Vertica speed and altitude are determined and selected during take-off and landing.
  13. Valve failures are easily observed on gauges and panels.
  14. PACK, BLEED, PACK FLOW and TEMPERATURE selections are made at the air condition panel.
  15. The selections made in the panels are visible on the screen.
  16. Understanding fundamentals of aircraft Cabin Pressurization and its
  17. The set is functional and configured like a typical aircraft Cabin Pressurization system.
  18. The trainer includes the following panels that will work functionally.
  19. Aircraft Cabin Pressurization panel
  20. Aircraft air condition panel
  21. Aircraft auto-pilot panel
  22. Test panel
  23. Master power panel
  24. Master caution panel
  25. Two transparent cabins in the training set to simulate the interior of the cabin.

Components:

  1. PSU (Passenger Service Unit)
  2. 10-inch Lower ECAM
  • Vertical speed indicator
  • Altimeter indicator
  • Cabin Altimeter
  • Cabin pressure
  • Air pressure
  • Differential pressure
  • Status area
  • Flow status
  • Pack flow status
  • Bleed status
  • Auto pilot status
  • Pressurization mode
  • Temp
  • Air/ground
  1. Min 2 Outflow valve
  2. Min 2 outflow control computers
  3. Aircraft Cabin Pressurization panel
  • Man V/S Control Switch
  • Mode selector
  • LDG ELEV Knop
  1. Aircraft air condition panel
  • Pack-1 control
  • Pack-2 control
  • ENG 1 Bleed
  • ENG 2 Bleed
  • APU Bleed
  • Pack Flow Selector
  1. Aircraft auto-pilot control panel
  • Vertical Speed Selector
  • Altitude Knop
  • Control Switch
  1. Terminals
  2. Master power panel
  3. Master power light
  4. Master caution panel
  5. Aural warning horn
  6. Test panel
  7. Circuit Breakers,
  8. LAN output
  9. Fault Panel for instructor.
  10. Outflow valve control boxes
  11. Outflow valve terminals
  12. Vacuum chamber (altitude simulator)
  13. Cabin pressure chamber (cabin simulator)
  14. Regulator (simulates air to cabin)
  15. Cabin pressure sensor
  16. 24 VDC power supply
  • The system mounted on a metal/aluminum mobile stand.
  • Metal/aluminum frame with 4 wheels. 2 of 4 wheels are lockable.
  • Training video for teachers
  • Delivered fully assembled tested and ready to operate
  • Colored Ultraviolet printing method on aluminum composite panel

Documentation:

  • User’s Manual
  • Instructor’s Guide
  • Study Guide

Power Specs

  • Electrical box
  • Residual current device
  • Emergency Button
  • Energy Signal Lamp
  • 110 VAC 60 Hz or 220-240 VAC 50 Hz

Dimensions and weight

  • Height: Width:    Depth: